Sometimes your home alarm goes off for no apparent reason. Although it is designed for the safety of the residents if it goes off continuously for no reason it can become maddening. In this case, you must use the keyboards to deactivate it. However, there may be times when you forget the code. In this kind of case, what should be done to deactivate it? This guide will provide you with information on the subject.
What precautions should be taken ?
You must take certain precautions to deactivate an alarm without a code. First, you need to find the location of the home alarm system access panel. Usually, the main alarm panel is located in a metal box that guards the control circuit as well as the back-up battery. Now you need to know how to reach the console.
There is located a back-up battery connected to the keyboard. You can find it anywhere in the house. The location is chosen when the alarm system is installed. Be sure to immediately turn off AC power to the wall alarm console by disconnecting the AC power or power. Also, be sure to unplug the device's transformer from the wall outlet.
You can then confirm that the panel is powered off by checking the touchscreen or keypad. If your main panel is a metal box, it can be opened by removing the screws. However, if it is locked, you can open it with its key. By using this site link you can find others useful solutions.
What are the steps for deactivating the home alarm ?
You must use the console access key or other convenient means to unlock and open the system media. You must then disconnect one of the wires connected to the main battery of the system. In order to disconnect it you will have to shake the connector from side to side. After that, you will have to remove the wire in order to cut the circuit and stop the power.
It is usually in one bloc and remains visible in the majority of units. If you are unsure of how to disassemble your home alarm console, be sure to consult the troubleshooting guide or instruction manual. Be aware that most instruction manuals provide information on how to eliminate annoying noises when disarming an alarm system without a code.
To solve the problem of deactivating the alarm without a code, you will have to disconnect the power supply and the back-up battery from the console. You will also need to unplug the wire that is connected to the AC power transformer to completely stop the alarm. For the control panel, it will certainly be necessary to disconnect one of the wires coming out of the transformer.